You can reset the F35 error by unplugging your Whirlpool washing machine for 10 to 20 minutes. Is the malfunction code appearing again on the display?? It may not help, and the error will reappear. You may need to perform repairs.
A “F35” error code indicates that the water level pressure switch operation (key #20) is malfunctioning. A blocked air dome or pressure switch hose (key #21) may be the cause. On the left hand side of the tub, you will find the air dome.
How Do I Fix F35 Error Code?
An air pressure tube between the bottom of the washer tub and the analog pressure sensor may be to blame for this error code. This problem may be resolved by unplugging the washer and checking the air pressure tube.
How Do I Reset My Whirlpool Duet Steam?
RINSE, WASH, and STOP are the three lights that are illuminated when you rotate your dial. After you have turned off your washer, unplug it for ten seconds. It should be reset when you turn it back on.
When the washer does not run at all, for example, the F error code appears. Modes and starts do not change. The program does not start after it is turned on. A continuous sound is made by the appliance, and LEDs blink when it is powered on.
How Do You Clear Error Codes On Frigidaire Affinity Washer?
You can signal the last error code by turning the program knob clockwise nine times from the Start position.
You can clear the code by holding down the Options and Pause Cancel buttons for three seconds.
The washer will return to normal operation after you exit diagnostic mode.
What Does F35 Mean On A Kenmore Washing Machine?
An F35 indicates that the pressure sensor on the water level has failed. When there is excessive detergent suds in a tub, the SUD will appear. Be sure to only use the recommended amount of HE detergent. You can then run the washer without clothes on a drain and spin it.
Watch how to fix f35 error code on whirpool duet steam Video